-
NUS_NNI_Nanocore Polypropylene AtomicSteps Chemical_Vapor_Deposition PMNPT BFO MeltingPoint Styrene Steps LDPE LiIonBattery BloodCell Polyethylene DiffractiveOpticalElements Ito CVD MonoLayer Gallium LeakageCurrent Lateral Singapore GlassTemperature Magnetic Force Microscopy Strontium Spincast HexacontaneFilm PolyimideFilm Adhesive Optical Ptfe PvdfBead PvdfFilm contact Insulator LightEmiting
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Single-crystal SrTiO3(001) after Annealing
Single-crystal SrTiO3(001) after 1h annealing at 1000°C in air. Formation of steps and terraces, and assembly at the nanoscale of SrO and TiO2 chemical terminations.
Scanning Conditions
- System: NX10
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256