-
pulsed_laser_deposition Ananth Ceramics Layer AtomicLayer Foil OpticalElement Ito SurfaceOxidation LightEmission Copolymer Phenanthrene Cobalt-dopedIronOxide Co/Cr/Pt Sadowski Mobile Indium_tin_oxide Floppy Chemical_Vapor_Deposition Cell blended polymers WS2 KAIST FM-KPFM MembraneFilter PhaseTransition SRAM TPU PvdfBead LiquidImaging ReflexLens Led Imprint BiVO4 StyreneBeads
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm