-
Carbon non_contact ito_film FuelCell SingleLayer Polytetrafluoroethylene BaTiO3 Butterfly TriGlycineSulphate tip_bias_mode Celebration EPFL Monisha Anneal Chemical_Vapor_Deposition semifluorinated_alkanes SingleCrystal MechanicalProperties ScanningThermalMicroscopy PUR neodymium_magnets light_emission Pipette PtfeFilter blended polymers ForceVolume 2dMaterials STM CP-AFM nanobar SetpointMode Alkane epitaxy Oxide Electrode
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Lithography on Si substrate
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: ContscPt (k=0.2N/m, f=25kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 1Hz
- Pixel: 1024×512
- Litho. mode: Tip bias mode
- Litho. Tip bias: Black -10V, White 0V