-
AAO OxideLayer STO Magnets Forevision frequency_modulation Tungsten SicMosfet ThermalDetectors lift_mode UnivCollegeLondon Chemical Vapor Deposition Tin sulfide Co/Cr/Pt Beads ScratchMode Polyvinylidene TPU ito_film LateralPFM MoS2 MagneticForceMicroscopy Pattern PyroelectricDetector Ni-FeAlloy TempControl Defects Graphite KelvinProbeForceMicroscopy Aluminium_Oxide FloppyDisk IVSpectroscopy ReflexLens MetalCompound Conductance
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Fe-Nd-B Alloy
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm