-
Ito AnodizedAluminumOxide Imprint GaN CuParticle MetalCompound Glass Magnetic Force Microscopy Jason Austenite molecular_self_assembly Spain PinpointPFM LiNbO3 LateralPFM Electical&Electronics LDPE Water Hafnium_dioxide LiquidCrystal Bismuth PhaseTransition Non-ContactMode Magnetostrictive DeflectionOptics MeltingPoint Sapphire CP-AFM Sio2 fluorocarbon HDD IMT_Bucharest epitaxy BTO PpLdpe
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Single-crystal SrTiO3(001) after Annealing
Single-crystal SrTiO3(001) after 1h annealing at 1000°C in air. Formation of steps and terraces, and assembly at the nanoscale of SrO and TiO2 chemical terminations.
Scanning Conditions
- System: NX10
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256