-
LiquidCrystal Stiffness LMF MoirePattern Epoxy Pinpoint WWafer strontiu_titanate Mfm MBE Butterfly I-VSpectroscopy nanomechanical STO CHRYSALIS_INC Step Defects PatternedSapphireSubstrat SiliconeOxide semifluorinated_alkanes FastScan Molybdenum Cancer layers NtuEee NiFe Polymer temp C_AFM MetalCompound mechanical property Adhesive CP-AFM Piezoresponse HfO2
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Single-crystal SrTiO3(001) after Annealing
Single-crystal SrTiO3(001) after 1h annealing at 1000°C in air. Formation of steps and terraces, and assembly at the nanoscale of SrO and TiO2 chemical terminations.
Scanning Conditions
- System: NX10
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256
- Scan Mode: LFM
- Cantilever: qpBioAC CB1 (k=0.02N/m, f=110kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 1Hz
- Pixel Size: 256 × 256