-
Liquid SoftSample dielectric trench Lattice STM CrAu HighAspect Pzt LDPE Au111 Jason Alkane Boundary Granada graphene_hybrid FrictionalForceMicroscopy VinylAlcohol I-VSpectroscopy MechanicalProperties 2dMaterials Pinpoint BismuthFerrite TipBiasMode AIN HiVacuum Ca10(PO4)6(OH)2 IIT-chennai CalciumHydroxyapatite TempControl Filter GaAs GaP semifluorinated alkane AEAPDES Mfm
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm