-
Polyimide Ni-FeAlloy fluorocarbon PtfeMembrane Crystal Permalloy Strontium atomic_layer TemperatureControllerAFM Hole Aluminum Inorganic Boron Carbon Vinylpyridine AEAPDES ito_film FuelCell Polytetrafluoroethylene LiIonBattery TransitionMetal CancerCell Nanotechnology cannabis Silver ContactModeDot Worcester_Polytechnic_Institute NtuEee Beads AtomicLayer MechanicalProperty AlkaneFilm Writing domain_switching H-BN
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Collagen film phase change by temp
Scanning Conditions
- System: NX10
- Scan Mode: Tapping
- Cantilever: AC160TS
- Scan Size: 20μm×20μm, 1μm×0.5μm
- Scan Rate: 0.3Hz for 20µm×20µm scan, 1Hz for 1µm×0.5µm scan
- Pixel: 512 × 256 for 20µm×20µm scan, 256 × 128 for 1µm×0.5µm scan
- Scan Mode: Tapping
- Cantilever: AC160TS
- Scan Size: 20μm×20μm, 1μm×0.5μm
- Scan Rate: 0.3Hz for 20µm×20µm scan, 1Hz for 1µm×0.5µm scan
- Pixel: 512 × 256 for 20µm×20µm scan, 256 × 128 for 1µm×0.5µm scan