-
Grain Sphere LowDensityPolyethylene Adhesive Molybdenum_disulfide SurfaceChange LiftHeight MoS2 SiliconeOxide KevlarFiber Tungsten PetruPoni_Institute PrCurve Austenite MfmPhase ChemicalCompound Blood fluoroaalkane CeramicCapacitor Celebration Pvdf PyroelectricDetector Lateral Hafnium_dioxide LateralForce Melt BloodCell LiftMode University_of_Regensburg PVA OxideLayer Platinum Lattice Workfunction SFAs
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Fe-Nd-B Alloy
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm