-
SrTiO3 PhthalocyaninePraseodymium IISCBangalore YttriaStabilizedZirconia Resistance block_copolymer LithiumNiobate Aluminum TCS PS_PVAC RedBloodCell Polypropylene YszSubstrate AdhesionForce Self-assembledMonolayer Copolymer Floppy Reading gallium_nitride Vanadate Cross-section PolymerBlend Ca10(PO4)6(OH)2 DataStorage LiquidCell Fendb PpLdpe Defect H-BN BiVO4 SmalScan Trench Thermal cannabinoid Polyurethane
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
NiFe
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1.2μm×1.2μm
- Scan Rate: 0.5Hz
- Pixel: 256×256
- Lift height: 20nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1.2μm×1.2μm
- Scan Rate: 0.5Hz
- Pixel: 256×256
- Lift height: 20nm