-
Iron InLiquid graphene_hybrid CalciumHydroxyapatite pulsed_laser_deposition Oxide CrAu Gallium_Arsenide SAM GlassTemp Dental Defects LateralForceMicroscopy Morphology align Kevlar DentalProsthesis NUS Moire HardDiskMedia Insulator Zagreb TemperatureControllerStage C60H122 ScanningSpreadingResistanceMicroscopy MBE Fet IcelandSpar Croatia Varistor UnivCollegeLondon BismuthVanadate IISCBangalore BiasMode Dimethicone
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Cutting Graphene
Scanning Conditions
- System : FX40
- Scan Mode: Contact after lithography
- Scan Rate : 0.7 Hz
- Scan Size : 30μm×30μm
- Pixel Size : 256×256
- Cantilever : ElectricMulti75-G (k=3N/m, f=75kHz)
- Lithography condition : Force 500 nN, writing speed 0.1μm/s, AC bias 10 V @ 40kHz