-
Hydroxyapatite Vinylpyridine StyreneBeads MolecularSelfAssembly ItoGlass DeoxyribonucleicAcid CBD Polarization Oxide polymeric_arrays Composition ElectroChemical Non-ContactMode Wonseok lift_mode FrequencyModulation fe_nd_b Sic AlkaneFilm Optoelectonics Mapping MultiferroicMaterials Defect self-assembly ThermalDetectors MLCC MechanicalProperty PinpointPFM Fendb Polydimethylsiloxane BTO Calcium BCZT Cobalt Ananth
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Carbon Nanotube on Si
Scanning Conditions
- System: XE7
- Scan Mode: SThM, KPFM, PinPoint CP-AFM
- Cantilever: Nanothermal probe, NCST-Au (k=7.4N/m, f=160kHz), CDT-CONTR (k=0.5N/m, f=20kHz)
- Scan Size: 0.6μm×0.6μm
- Scan Rate: 0.5Hz, 0.5Hz, 0.15Hz
- Pixel: 256×128
- Scan Mode: SThM, KPFM, PinPoint CP-AFM
- Cantilever: Nanothermal probe, NCST-Au (k=7.4N/m, f=160kHz), CDT-CONTR (k=0.5N/m, f=20kHz)
- Scan Size: 0.6μm×0.6μm
- Scan Rate: 0.5Hz, 0.5Hz, 0.15Hz
- Pixel: 256×128