-
biocompatible BlockCopolymer GranadaUniv FAFailureAnlaysis Polytetrafluoroethylene Neodymium P3HT Electrode Composite Pvdf ScanningThermalMicroscopy Domain cannabis Hydroxyapatite Pinpoint PFM Tungsten_disulfide Display Tape Potential Temperature ConductingPolymer non_contact Tungsten Blood ForceDistanceSpectroscopy Semiconductor MagneticForce Change LithiumNiobate Bismuth Worcester_Polytechnic_Institute Bio Trench Hexylthiophene ContactModeDot
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Adhesive system
Scanning Conditions
- System: NX10
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256