-
Defect HanyangUniv tip_bias_mode Hexacontane Mechanical margarine Piezo AnodizedAluminumOxide Titanate DOE Alkane Laser PVAP3HT Polyethylene Imprint contact TyphimuriumBiofilm SRAM temp_control Indent TransitionMetal MoS2 ContactMode OpticalModulator PvdfFilm fluoroaalkane NUS Fluoride ThermalDetectors HOPG cross section PDMS LiNbO3 LiftMode epitaxy
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Trench Etch Profile on MESA
Top dielectric trench etch profile on MESA on Si wafer.
Scanning Conditions
- System: NX20
- Scan Mode: Non-contact
- Cantilever: AR5T-NCHR (k=42N/m, f=300kHz)
- Scan Size: 6μm×6μm
- Scan Rate: 0.12Hz
- Pixel Size: 1024 × 256
- Scan Mode: Non-contact
- Cantilever: AR5T-NCHR (k=42N/m, f=300kHz)
- Scan Size: 6μm×6μm
- Scan Rate: 0.12Hz
- Pixel Size: 1024 × 256